Home | Techniques | Ultrasound-Guided Techniques | Upper Extremity | Ultrasound-Guided Axillary Brachial Plexus Block

Ultrasound-Guided Axillary Brachial Plexus Block


Figure 1: Transducer position and needle insertion in ultrasound-guided axillary brachial plexus block.


  Indications: forearm and hand surgery

  Transducer position: short axis to arm, just distal to pectoralis major insertion

  Goal: local anesthetic spread around axillary artery

  Local anesthetic: 20-25 mL

General Considerations

Figure 2: Cross-sectional anatomy of the axillary fossa and the transducer position to image the brachial plexus. The brachial plexus (BP) is seen scattered around the axillary artery and enclosed in the adipose tissue compartment containing BP, axillary artery (AA), and axillary vein (AV). MCN, musculocutaneous nerve.

The axillary brachial plexus block offers several advantages over the other approaches to the brachial plexus. The technique is relatively simple to perform, and may be associated with a relatively lower risk of complications as compared with interscalene (e.g., spinal cord or vertebral artery puncture) or supraclavicular brachial plexus block (e.g., pneumothorax). In clinical scenarios in which access to the upper parts of the brachial plexus is difficult or impossible (e.g, local infection, burns, indwelling venous catheters), the ability to anesthetize the plexus at a more distal level may be important. The axillary brachial plexus block is also relatively simple to perform with ultrasound because of its superficial location. Although individual nerves can usually be identified in the vicinity of the axillary artery, this is not necessary because the deposition of local anesthetic around the axillary artery is sufficient for an effective block.

Ultrasound Anatomy

The structures of interest are superficial (1-3 cm), and the pulsating axillary artery can be identified usually within a centimeter of the skin surface on the anteromedial aspect of the proximal arm, Figure 2. The artery can be associated with one or more axillary veins, often located medially to the artery. Importantly, an undue pressure with the transducer during imaging may obliterate the veins, rendering veins invisible and prone to puncture with the needle if care is not taken to avoid it. Surrounding the axillary artery are three of the four principal branches of the brachial plexus: the median (superficial and lateral to the artery), the ulnar (superficial and medial to the artery), and the radial (posterior and lateral or medial to the artery) nerves (Figure 2). These are seen as round hyperechoic structures, and although the previously mentioned locations relative to the artery are frequently encountered, there is considerable anatomic variation from individual to individual. Three muscles surround the neurovascular bundle: the biceps brachii (lateral and superficial), the wedge-shaped coracobrachialis (lateral and deep), and the triceps brachii (medial and posterior). The fourth principal nerve of the brachial plexus, the musculocutaneous nerve, is found in the fascial layers between biceps and coracobrachialis muscles, though its location is variable and can be seen within either muscle. It is usually seen as a hypoechoic flattened oval with a bright hyperechoic rim. Moving the transducer proximally and distally along the long axis of the arm, the musculocutaneous nerve will appear to move toward or away from the neurovascular bundle in the fascial plane between the two muscles.

Distribution of Blockade

The axillary approach to brachial plexus blockade (including musculocutaneous nerve) results in anesthesia of the upper limb from the midarm down to and including the hand. The axillary nerve itself is not blocked because it departs from the posterior cord high up in the axilla. As a result, the skin over the deltoid muscle is not anesthetized. With nerve stimulator and landmark-based techniques, the blockade of the musculocutaneous is often unreliable, leading to a lack of blockade on the lateral side of the forearm and wrist. This problem is remedied easily with the ultrasound-guided approach because the musculocutaneous nerve is readily apparent and reliably anesthetized. When required, the medial skin of the upper arm (intercostobrachial nerve, T2) can be blocked by an additional subcutaneous injection just distal to the axilla, if required.


Equipment needed includes the following:

 Ultrasound machine with linear transducer (8-14 MHz), sterile sleeve, and gel/p>

  Standard nerve block tray

  Syringes with local anesthetic (20-25 mL)

  5-cm, 22-gauge short-bevel insulated stimulating needle

  Peripheral nerve stimulator

  Sterile gloves

Landmarks and Patient Positioning

Figure 3: Patient position and insertion of the needle for ultrasound-guided (in plane) axillary brachial plexus block. All needle redirections except occasionally for the musculocutaneous nerve are done through the same needle insertion site. Seldom, another insertion of the needle is made to block the musculocutaneous nerve.

The axillary brachial plexus block requires access to the axilla. Therefore abduction of the arm 90° is an appropriate position that allows for transducer placement and needle advancement, as well as patient comfort (Figure 3). Care should be taken not to overabduct the arm because that may cause discomfort as well as produce tension on the brachial plexus, theoretically making it more vulnerable to needle or injection injury during the block procedure.

The pectoralis major muscle is palpated as it inserts onto the humerus, and the transducer is placed on the skin immediately distal to that point perpendicular to the axis of the arm. The starting point should result in part of the transducer overlying both the biceps and the triceps muscles (i.e., on the medial aspect of the arm). Sliding the transducer across the axilla will bring the axillary artery and brachial plexus into view, if not readily apparent.


  The goal is to deposit local anesthetic around the axillary artery. Sometimes, a single injection is sufficient to spread in a   'doughnut' shape around the artery; more commonly, two or three injections are required. In addition, an aliquot of local   anesthetic should be injected adjacent to the musculocutaneous nerve.



Figure 4: (A,B) Median (MN), ulnar (UN), and radial (RN) nerves are seen scattered around the axillary artery with the tissue sheath (white-appearing tissue fasciae around the artery) containing nerves and axillary vessels. The musculocutaneous nerve (MCN) is seen between the biceps and coracobrachialis (CBM) away from the rest of the brachial plexus. AA, axillary artery.


Figure 5: Musculocutaneous nerve (MCN) is seen approximately 3 cm from the axillary neurovascular bundle (around AA). MCN in this image is positioned between the biceps and coracobrachialis muscles (CBM). MCN must be blocked with a separate injection of local anesthetic for a complete axillary brachial plexus block.

With the patient in the proper position, the skin is disinfected and the transducer is positioned in the short axis orientation to identify the axillary artery (Figure 4A) about 1 to 3 cm from the skin surface. Once the artery is identified, an attempt is made to identify the hyperechoic median, ulnar, and radial nerves (Figure 4B). However, these may not be always well seen on an ultrasound image. Frequently present, a reverberation artifact deep to the artery is often misinterpreted for the radial nerve. Prescanning should also reveal the position of the musculocutaneous nerve, in the plane between the coracobrachialis and biceps muscles (a slight proximal-distal movement of the transducer is often required to bring this nerve into view) (Figure 5).

The needle is inserted in-plane from the cephalad aspect (Figures 1 and 3) and directed toward the posterior aspect of the axillary artery (Figure 6).

As nerves and vessels are positioned together in the neurovascular bundle by adjacent musculature, advancement of the needle through the axilla may require careful hydrodissection with a small amount of local anesthetic or other injectate. This technique involves the injection of 0.5 to 2 mL, which 'peels apart' the plane in which the needle tip is continuously inserted. The needle is then advanced a few millimeters and more injectate is administered.

Local anesthetic should be deposited posterior to the artery first, to avoid displacing the structures of interest deeper and obscuring the nerves, which is often the case if the median or ulnar nerves are injected first. Once 5 to 10 mL is administered, the needle is withdrawn almost to the level of the skin, redirected toward the median and ulnar nerves, and a further 10 to 15 mL is injected in these areas to complete the circle around the artery. The described sequence of injection is demonstrated in Figure 7.

Finally, the needle is once again withdrawn to the biceps and redirected toward the musculocutaneous nerve. Once adjacent to the nerve (stimulation will result in elbow flexion), 5 to 7 mL of local anesthetic is deposited.

In an adult patient, 20 to 25 mL of local anesthetic is usually adequate for successful blockade. Complete spread around the artery is necessary for success but infrequently seen with a single injection. Two to three redirections and injections are usually necessary for reliable blockade, as well as a separate injection to block the musculocutaneous nerve.

Figure 6: Needle insertions for axillary brachial plexus block. Axillary brachial block can be accomplished by two to four separate injections (1-4) to accomplish a block of the entire brachial plexus. MCN, musculocutaneous nerve;RN, radial nerve; MN, median nerve; UN, ulnar nerve.

Figure 7: An image demonstrating the ideal distribution patterns of local anesthetic spread after three separate injections (1-3) to surround the axillary artery with local anesthetic and block the radial nerve (RN), median nerve (MN), and ulnar nerve (UN). Musculocutaneous nerve (MCN) is blocked with a separate injection (4) because it is often outside the axillary neurovascular tissue sheath. AA, axillary artery.

 NYSORA Highlights

 Frequent aspiration and slow administration of local anesthetic are critical to decrease the risk of an intravascular     injection.

 Cases of systemic toxicity have been reported after apparently straightforward ultrasoundguided axillary brachial plexus     blocks.

 Keep the pressure applied on the transducer steady to avoid opening and closing of the multitude of veins in the axilla     and reduce the risk of an intravascular injection.

Continuous Ultrasound-Guided Axillary Block

Figure 8: Continuous axillary brachial plexus block is performed using a similar technique as in the single-injection method. After injection of a small volume of local anesthetic through the needle to document its proper placement, the catheter is advanced 2-3 cm beyond the needle tip.

The continuous axillary catheter is a useful technique for analgesia and a sympathetic block, such as following finger reimplantation surgery. The goal of the continuous axillary block is similar to the non-ultrasound-based techniques: to place the catheter in the vicinity of the branches of the brachial plexus (i.e., within the "sheath" of the brachial plexus). The procedure consists of three phases-(1) needle placement, (2) catheter advancement, and (3) securing of the catheter. For the first two phases of the procedure, ultrasound can be used to assure accuracy in most patients. The needle is typically inserted in plane from the cephalad-to-caudad direction, just as in the single-injection technique (Figure 8).

After an initial injection of the local anesthetic to confirm the proper position of the needle-tip, the catheter is inserted 2 to 3 cm beyond the needle tip. Injection is then repeated through the catheter to document adequate spread of the local anesthetic. Alternatively, the axillary artery can be visualized in the longitudinal view and the catheter is inserted in the longitudinal plane alongside the axillary artery 4 to 5 cm. The longitudinal approach requires a significantly greater degree of ultrasonographic skill, yet no data exist at this time suggesting that one approach is more efficient or better than the other one.

 NYSORA Highlights

 Tunneling of the catheter or taping on the shaved skin using transparent occlusive dressing are commonly used methods     of securing the catheter.


Subscribe to comments feed Comments (0 posted)

total: | displaying:

Post your comment

  • Bold
  • Italic
  • Underline
  • Quote

Please enter the code you see in the image:


Tagged as:

No tags for this article

Image gallery

Rate this article